Recommended Materials And Equipment; Packaging And Transporting Guidelines - HP EliteBook x360 1030 G7 Maintenance And Service Manual

Keep work area free of nonconductive materials such as ordinary plastic assembly aids and polystyrene
●
foam.
● Use field service tools, such as cutters, screwdrivers, and vacuums, that are conductive.

Recommended materials and equipment

HP recommends certain materials and equipment to prevent static electricity.
Antistatic tape
●
Antistatic smocks, aprons, or sleeve protectors
●
Conductive bins and other assembly or soldering aids
●
Conductive foam
●
● Conductive tabletop workstations with ground cord of 1 MΩ ±10% resistance
Static-dissipative table or floor mats with hard tie to ground
●
● Field service kits
Static awareness labels
●
Wrist straps and footwear straps providing 1 MΩ ±10% resistance
●
Material handling packages
●
Conductive plastic bags
●
● Conductive plastic tubes
Conductive tote boxes
●
● Opaque shielding bags
Transparent metallized shielding bags
●
Transparent shielding tubes
●

Packaging and transporting guidelines

Follow these grounding guidelines when packaging and transporting equipment.
To avoid hand contact, transport products in static-safe tubes, bags, or boxes.
●
Protect ESD-sensitive parts and assemblies with conductive or approved containers or packaging.
●
Keep ESD-sensitive parts in their containers until the parts arrive at static-free workstations.
●
● Place items on a grounded surface before removing items from their containers.
Always be properly grounded when touching a component or assembly.
●
ENWW Packaging and transporting guidelines 39