Connect Network Cable - ABB Terra DC wallbox Installation Manual

6. Tighten the bolts. The advised torque value is 2.9Nm.
7. Connect the Fan connector to the mating one located on the lateral cable-gland
5.5.3

Connect network cable

Preconditions:
• Tools: Network cable pliers, RJ45 connector; network cable straight,
1.Cut the network cable to the correct length to reach the Ethernet connector. The con-
nector is located near the bottom of the charger.
2.Use network cable pliers to install an RJ45 connector on to the network cable. Using
the Ethernet color standard EIA/TIA T568A
3.Insert the RJ45 connector in to the Ethernet connector.
2 2 -O CT -19
WARNING
Leave the main switch switched off. The Terra DC Wallbox is
not ready for use yet. Please contact the ABB Service de-
partment at least one week in advance to make an appoint-
ment for commissioning.
NOTICE
Only connect the network cable if a wireless 2G/3G connec-
tion is not possible.
T ERRA D C WA LLBO X
30 /40