Dlp-L69 Installing Air Plenum In Ncs 2002 Shelf For Ansi 23-Inch Configuration - Cisco NCS 2002 Installing

DLP-L69 Installing Air Plenum in NCS 2002 Shelf for ANSI 23-inch Configuration

Figure 8: Installing the NCS 2002 chassis below the horizontal air plenum
Step 7 Return to your originating procedure (NTP).
DLP-L69 Installing Air Plenum in NCS 2002 Shelf for ANSI 23-inch Configuration
Purpose
Tools/Equipment
Required/As Needed
Onsite/Remote
Security Level
Note
The air plenums for ANSI 23-inch configuration can also be pre-assembled outside the cabinet and then
installed inside the cabinet. See
on page 12
Installing the Air Flow Regulator
8
This task installs the air plenum for the NCS 2002 shelf in the ANSI 23-inch cabinet
or rack configuration.
• #2 Phillips Dynamometric screwdriver
• Medium slot-head screwdriver
• Small slot-head screwdriver
• Screws: #12-24 x 3/4 pan-head Phillips mounting screws (4)
• Wing head screws (4)
• Adapter plates
• One air plenum kit (horizontal and vertical air plenum)
As needed
Onsite
None
DLP-L71 Installing Pre-assembled Air Plenums in ANSI 23-inch Configuration,
Installing the Air Flow Regulator