Front Side Of The Vtr - Sony BKMW-E3000 Installation Manual

1-2-2. Front Side of the VTR

1. Remove the upper lid (front) assembly.
(1) Loosen the screw (with stopper) completely.
(2) Move the two knobs of the upper lid (front)
assembly inwards. (To secure the upper lid (front)
assembly, move the knob outwards.)
(3) Hold the back of the upper lid (front) assembly,
and pull out in the arrow direction.
Knob
Screw with stopper
BKMW-E3000
Upper lid (front) assembly
Knob
Removal
Installation
2. Remove the front panel.
(1) Remove the left and right screws (one each)
securing the front panel.
(2) Push the left and right unlock buttons, and open
the lower control panel as shown in the figure.
(3) Unhook the two hooks at the bottom of the front
panel.
Hook
PSW3 x 6
Unlock
button
Lower control panel
(4) Release the two hooks and three claws from the
chassis, and remove the front panel in the arrow
direction.
Front panel
Claw
Hook
Claw
Front panel
Hook
PSW
3 x 6
Unlock button
Claw
Hook
1-15 (E)