Names And Functions Of Parts; Front - Sony MPE-200 Operation Manual

Names and Functions of Parts

Front

aPower LED
cPower button
a Power LED
Lights green when the unit is operating normally.
This LED, in combination with the INFORMATION LED,
indicates the status of the system.
b INFORMATION LED
Lights blue when the unit is operating normally.
This LED, in combination with the power LED, indicates
the status of the system.
Power LED IMFORMATION
LED
Lit (green) Lit (blue)
Lit (green) Off
Blinking (green) Off
Lit (red) Off
Blinking (red) Off
Off Off
bINFORMATION LED
Status
Operation normal
Firmware starting up
or shutting down
Unit starting up
Standby status
Unit shutting down
Power not supplied
c Power button
When you press this button during standby status, the unit
starts up.
When you press and hold this button for one to two
seconds while the unit is powered, the INFORMATION
LED turns off and the unit begins shutting down. Do not
disconnect the power supply until the power LED remains
lit in red (standby status).
Press and hold this button for five seconds or more to force
shutdown.
CAUTION
When forced shutdown is performed, configuration data
on the unit may not be saved.
Names and Functions of Parts
23