Table of Contents
Advertisement
(3) Attach the ETHERNET panel to the VTR using
the four screws.
m
. For the recorder, check that the coaxial cables
are connected correctly as shown in the figure.
. When the number of attaching screw is not
enough, use screws (BVTT3 x 6) of the sup-
plied accessories.
< For the recorder >
ETHERNET panel
Coaxial cables
BVTT3 x 6
BVTT3 x 6
1-12 (E)
ETHERNET panel
12. Attach the harness guard assembly to the VTR.
(1) Removing a screw from the MB reinforcement,
and attach the harness guard assembly onto the
MB reinforcement using a screw (with stopper) as
shown in the figure.
Harness guard assembly
Screw with stopper
MB reinforcement
MB reinforcement
PSW3 x 8
BKMW-E3000
Advertisement
Table of Contents
