AEG BSE577221M User Manual page 37

Turn off the oven and
wait until it is cold.
Step 1
Set the function:
Step 2 Turn the control knob (for the temperature) to set the cleaning mode.
Option
P1
P2
Step 3
- press to start the cleaning.
Step 4 After cleaning, turn the knob for the heating functions to the off position.
During the cleaning the oven lamp is off. The oven door stays locked. When the oven
is cold, the door unlocks.
When the oven is at the set temperature, the door locks. Until the door unlocks the dis-
play shows: the bars of the heat indicator,
turn the knob for the oven functions to the off position.
Turn off the oven and
wait until it is cold.
12.4 Cleaning reminder
To remind you that the pyrolysis is
necessary, PYR flashes in the display for
10 seconds after each activation and
deactivation of the oven.
The cleaning reminder
goes out:
• after the end of the
pyrolysis.
• if you press
at the same time
while PYR flashes in the
display.
Before the pyrolytic cleaning:
Remove all accessories.
. - flashes.
Cleaning mode
Light cleaning
Normal cleaning
. To stop cleaning before it is completed,
When the cleaning ends:
Clean the cavity with a soft
cloth.
12.5 How to clean: water tank
Do not pour water into the water tank
during the cleaning.
and
ENGLISH
Clean the oven floor and the in-
ner door glass with warm water,
a soft cloth and a mild deter-
gent.
Duration
1 h 30 min
2 h 30 min
Remove the residue from the
bottom of the cavity.
37