9. USING THE ACCESSORIES
Refer to Safety chapters.
9.1 Using the core
The core temperature sensor measures
the core temperature of the meat. When
the meat is at the set temperature, the
oven turns off.
There are two temperatures to be set:
• The oven temperature. Refer to the
table for roasting.
• The core temperature. Refer to the
table for the core temperature sensor.
Only use the core
temperature sensor supplied
with the oven, or genuine
1. Set the oven function and the oven
2. Put the point of the core temperature
sensor (with the symbol
handle) into the centre of the meat.
3. Put the plug of the core temperature
sensor into the socket on the top of
Make sure that the core temperature
sensor stays in the meat and in the
socket during the cooking.
When you use the core temperature
sensor for the first time, the default
core temperature is 60 °C. While
flashes, you can use the knob for the
temperature to change the default
The display shows the symbol of the core
temperature sensor and the default core
temperature, or wait 10 seconds for
the setting to be saved automatically.
The new default core temperature is
displayed during the next use of the core
When the meat is at the set core
temperature, the symbol for the core
core temperature flash. The signal
sounds for 2 minutes.
5. Press any button or open the oven
door to stop the signal.
6. Remove the plug of the core
temperature sensor from the socket.
Remove the meat from the oven.
7. Turn off the oven.
Every time you put the core temperature
sensor in the socket, you need to set the
core temperature time again. You cannot
select the duration and end time.
When the oven calculates the provisional
duration time for the first time, the
the calculation ends, the display shows
the duration of the cooking. Calculations
run in the background during the
cooking and the duration value in the
display is updated if necessary.
You can change the temperature at any
time during the cooking:
• one time - the display shows the
• two times - the display shows the
• three times - the display shows
to save the new core
and the default
Be careful when you remove
the tip and plug of the core
temperature sensor. The
core temperature sensor is
hot. There is a risk of burns.
flashes in the display. When
set core temperature; if desired, it
can be modified within 5 seconds.
current oven temperature.
the set oven temperature; if