Instructions - Brainlab Buzz 2.0 System And Technical User Manual

Instructions

3.1.2 Instructions
Disinfectant Compatibility
The Buzz system shall only be cleaned with the following disinfectant types:
Disinfectant Type
Alcohol based
Alkylamine based
Active oxygen based
Aldehyde/chloride based
NOTE: Use only surface disinfectants released in your specific market.
NOTE: Surface disinfectants may leave a residue. This can be easily removed using a dry cloth.
Always closely follow the directions of the disinfectant manufacturer.
Using cleaning fluids, disinfection wipes or cleaning procedures others than those specified may
damage equipment. It is suggested to only use disinfectants verified by Brainlab to avoid
damaging the system.
Cleaning Intervals
Clean the device after each use.
The frequency of cleaning depends on how frequently the system is used. Brainlab cannot give
general recommendations on cleaning intervals. This is within the user's responsibility.
Post-Cleaning
After cleaning, ensure that the all Buzz components are completely dry before using the system.
How to Clean Buzz
Step
1.
2.
3.
48
Shut down system.
Carefully clean interfaces, ensuring that no liquids enter the system.
Clean and disinfect all other surfaces with a compatible disinfectant.
Example
Meliseptol, Mikrozid AF Liquid
Incidin Plus 2%
Perform
Antiseptica Kombi - Flächendesinfektion
System and Technical User Guide Rev. 1.2 Buzz Ver. 2.0