System Messages - Brainlab Buzz 2.0 System And Technical User Manual

System Messages

2.4.2 System Messages
No Signal Message
This message indicates that the Buzz touch display is not receiving a video signal.
Check that the computer is switched on and booted. If this does not solve the problem, contact
Brainlab support.
Booting Screen
Status LED: Feature Panel
Color
Off
Green
34
Status Explanation
Off System is turned off (standby).
Flashing System is booting. Wait until LED is solid before use.
Solid System is booted and ready for use.
No link to Computer detected:
Short flash
every 2 • No mains power for the Computer, or
seconds
• No connection between the Computer and the Feature Panel
Figure 13
Figure 14
Figure 15
System and Technical User Guide Rev. 1.2 Buzz Ver. 2.0