Brainlab Buzz 2.0 System And Technical User Manual page 33

SYSTEM OVERVIEW
How to Turn Additional Touch Displays On
This procedure applies to all installation variants of the additional touch display.
Step
Press the Power button ① on the feature panel of the main display. All additional touch displays
will be powered.
How to Turn Additional Touch Displays Off
This procedure applies to all installation variants of the additional touch display.
Step
After the computer is completely shut down, all additional touch displays will be switched off au-
tomatically using relay control.
NOTE: The mains power disconnection of Buzz depends on the installation setup:
• If the power plug is accessible unplug the power plug from the socket.
• If an external mains switch is installed, turn off the mains switch.
• If the power plug is not accessible and no mains switch is installed, please contact Brainlab
support to disconnect the power plug.
System and Technical User Guide Rev. 1.2 Buzz Ver. 2.0
①
Figure 12
33