YEALINK T31 - USER GUIDE
Placing a Call
Using the handset:
1. Pick up the handset.
2. Enter the number and press the Send soft key.
Using the speakerphone:
1. With the handset on-hook, press
2. Enter the number and press the Send soft key.
Using the headset:
1. With the headset connected, press
the headset mode.
2. Enter the number and press the Send soft key.
Answering a Call
Using the handset:
Pick up the handset.
Using the speakerphone:
Press
.
Using the headset:
Press
.
You can reject an incoming call by pressing the Reject soft key.
Ending a Call
Using the handset:
Hang up the handset or press the EndCall soft key.
Using the speakerphone:
or the EndCall soft key.
Press
Using the headset:
Press the EndCall soft key.
2023 Smart Choice Communica2ons, LLC
Redial
• Press
desired entry, and press
• Press
last dialed number.
Call Mute
• Press
• Press
Call Hold
To place a call on hold:
Press the Hold soft key during an active call. To resume
the call, do one of the following:
• If there is only one call on hold, press the Resume soft key.
• If there is more than one call on hold, select the desired
to activate
call, and press the Resume soft key.
Call Transfer
You can transfer a call in the following ways:
Blind Transfer
1.
Press the Trans soft key during an active call.
2.
Enter the number you want to transfer to.
3.
Press the B Trans soft key.
Semi-Attended Transfer
1.
Press the Trans soft key during an active call.
2.
Enter the number you want to transfer to, and press the
Send soft key.
3.
Press the Trans soft key when you hear the ring-
back tone.
Attended Transfer
1. Press the Trans soft key during an active call.
2. Enter the number you want to transfer to, and press
the Send soft key.
3. Press the Trans soft key when the second party
answers.
to enter the Placed Calls list, select the
or the Send soft key.
twice when the phone is idle to dial out the
to mute the microphone during a call.
again to un-mute the call.
www.Smartchoiceus.com