Yealink T33 Quick User Guide
MAKING A CALL
Using the handset:
1.
Pick up the handset.
2.
Enter the number and press the Send soft key.
Using the speakerphone:
1.
With the handset on-hook, press
2.
Enter the number and press the Send soft key.
ANSWERING A CALL
Using the handset:
Pick up the handset.
Using the speakerphone:
Press
.
VOLUME ADJUSTMENT
Press
to adjust the volume.
Kingsway Technology Yealink SIP-T33 Quick Start User Guide
ENDING A CALL
Using the handset:
Hang up the handset or press the End Call soft key.
Using the speakerphone:
Press
or the End Call soft key.
MUTING A CALL
Press
to mute the microphone during a call.
Press
again to un-mute the call.
REDIAL
Press
to enter the Placed Calls list, select the
desired
entry, and press or the Send soft
key.
.
Press
twice when the phone is idle to dial
out the last dialed number.
CONFERENCE CALL
1. Press the Conf soft key during an active call. The
call is placed on hold.
2. Enter the number of the second party, then press
the Send soft key.
3. Press the Conf soft key again when the second
party answers. All parties are now joined in the
conference.
4. Press the End Call soft key to disconnect all par-
ties.
Note: You may split the conference call into two indi-
vidual calls by pressing the Split soft key.
PUTTING A CALL ON HOLD
To place a call on hold:
Press the Hold soft key during an active call.
To resume the call, do one of the following:
If there is only one call on hold, press the Resume
soft key.
If there is more than one call on hold, select the
desired call, and press the Resume soft key.
TRANSFERING A CALL
You can transfer a call in the following ways:
Blind Transfer
1.
Press the Trans soft key during an active call.
2.
Enter the number you want to transfer to.
3.
Press the B Trans soft key.
Attended Transfer
1.
Press the Trans soft key during an active call.
2.
Enter the number you want to transfer to, and
press the Send soft key.
3.
Press the Trans soft key when the second par-
ty answers.
CALL HISTORY
1. Press the History soft key when the phone is idle,
press
or
to scroll through the list.
2. Select an entry from the list, you can do the fol-
lowing:
Press the Send soft key to call the entry.
Press the Delete soft key to delete the
entry from the list.
Page 1 of 2
Need help?
Do you have a question about the T33 and is the answer not in the manual?
Questions and answers