ABC Design Pramy Luxe Instructions Manual page 4

Hide thumbs Also See for Pramy Luxe:

3. Removing the Wheels

In order to remove the wheels, you must press the button on the

axle, as shown in the picture, so that the wheel unlocks.

Now you can pull the wheel off the axle.

4. Locking and Releasing the Brake

In order the lock the brake, press the lever down.

In order to release the brake, press the lever up.

5. Mounting and Removing the Bumper Bar

In order to mount the bumper bar, you must place the bumper

bar in the holding device provided, until it locks in place.

In order to remove the bumper bar from the stroller, you must

press (1) the two plastic clips inward on the inside of the

stroller, and then remove (2) the bumper bar.

6. Adjusting the Height of the Bumper Bar

In order to adjust the height of the bumper bar, press the buttons

(1) on both sides inward, then you can select (2) the position. In

order to lock the Bumper Bar again, let go of the buttons.

pag e 4