Configuring Qos Queue And Class Setup - ZyXEL Communications EX5501-B0 User Manual

Click the Active button to enable this static route. When the switch goes to the right (
4a
function is enabled. Enter the Route Name as R.
Set IP Type to IPv4.
4b
Type the Destination IP Address 192.168.10.0 and IP Subnet Mask 255.255.255.0 for the destination,
4c
N2.
Click the Use Gateway IP Address button to enable this function. When the switch goes to the right
4d
( ), the function is enabled. Type 192.168.1.253 (R's N1 address) in the Gateway IP Address field.
Select ETHWAN as the Use Interface.
4e
Click OK.
4a
Now B should be able to receive traffic from A. You may need to additionally configure B's firewall
settings to allow specific traffic to pass through.

4.5 Configuring QoS Queue and Class Setup

This section contains tutorials on how you can configure the QoS screen.
Let us say you are a team leader of a small sales branch office. You want to prioritize e-mail traffic
because your task includes sending urgent updates to clients at least twice every hour. You also upload
data files (such as logs and e-mail archives) to the FTP server throughout the day. Your colleagues use
the Internet for research, as well as chat applications for communicating with other branch offices.
Chapter 4 Tutorials
EX5501-B0 / AX7501-B0 / PX7501-B0 User's Guide
55
), the