Download Print this page

L.L.Bean ALL WEATHER ADIRONDACK Assembly Instructions

Download this manual

Thank you for purchasing our All Weather Adirondack Chair.

Assembly of this product requires a 4mm hex key which is

included, and a 7/16" wrench.

We have found it helpful to have a second person present in at

least one step of the assembly

STEP 1

Read through these instructions thoroughly before beginning

assembly. We have found this to be of great value when first

assembling this product.

STEP 2

Remove all parts and hardware from packing material. Pieces

should be placed on a non abrasive surface (like the carton or

carpet) to prevent damage to the finish.

ALL WEATHER ADIRONDACK CHAIR

STEP 3

Identify all parts using assembly instructions on next page

STEP 4

Identify and count hardware using assembly instructions on next

page.

1 of 3

Page 1 Thank you for purchasing our All Weather Adirondack Chair. Assembly of this product requires a 4mm hex key which is included, and a 7/16” wrench. We have found it helpful to have a second person present in at least one step of the assembly...
Page 2 Step 1 Assembly Instructions Model: All Weather Adirondack Chair Step 1 Unfold chair assembly Step 2 Insert (2) 2¼" bolts, washers and locknuts Incorrect Correct into pre-drill holes Step 3 Insert pins into large holes washer Step 2 TOOLS NEEDED...
Page 3 Care This material is made of HDPE plastic resin that has been purified and UV protected. It is generally cared for and cleaned with soap and warm water. For certain stains and additional cleaning power, a 1/3 bleach and 2/3 water solution can be used on the product without affecting the color.