Operation; General Information; Safety Instructions - STIEBEL ELTRON DHB-E 13 LCD AU Operation And Installation

SPECIAL INFORMATION | OPERATION

General information

SPECIAL INFORMATION
- The appliance may be used by children aged 3
and older and persons with reduced physical,
sensory or mental capabilities or a lack of expe-
rience and know-how, provided that they are su-
pervised or they have been instructed on how to
use the appliance safely and have understood the
potential risks. Children must never play with the
appliance. Cleaning and maintenance by the user
may not be carried out by children unless they
are supervised.
- The tap can reach temperatures of up to 70 °C.
There is a risk of scalding at outlet temperatures
in excess of 43 °C.
- The appliance is suitable for supplying a shower
(shower operation). If the appliance is also or ex-
clusively used for shower operation, the qualified
contractor must adjust the temperature setting
range to 43 °C using the internal anti-scalding
protection on the appliance. When using preheat-
ed water, it must be ensured that the inlet tem-
perature does not exceed 55 °C.
- Ensure the appliance can be separated from the
power supply by an isolator that disconnects all
poles with at least 3 mm contact separation.
- The specified voltage must match the power
supply.
- The appliance must be connected to the earth
conductor.
- The appliance must be permanently connected to
fixed wiring.
- Secure the appliance as described in chapter "In-
stallation / Installation".
- Observe the maximum permissible pressure (see
chapter "Installation / Specification / Data table").
- The specific water resistivity of the mains water
supply must not be undershot (see chapter "In-
stallation / Specification / Data table").
- Drain the appliance as described in chapter "In-
stallation / Maintenance / Draining the appliance".
www.stiebel-eltron.com

OPERATION

1. General information
The chapters "Special information" and "Operation" are intended
for both users and qualified contractors.
The chapter "Installation" is intended for qualified contractors.
Note
Read these instructions carefully before using the appli-
ance and retain them for future reference.
Pass on the instructions to a new user if required.
1.1

Safety instructions

1.1.1 Structure of safety instructions
KEYWORD Type of risk
!
Here, possible consequences are listed that may result
from failure to observe the safety instructions.
f Steps to prevent the risk are listed. f
1.1.2 Symbols, type of risk
Symbol Type of risk
Injury
!
Electrocution
Burns
(burns, scalding)
1.1.3 Keywords
KEYWORD Meaning
DANGER Failure to observe this information will result in serious
injury or death.
WARNING Failure to observe this information may result in serious
injury or death.
CAUTION Failure to observe this information may result in non-seri-
ous or minor injury.
DHB-E LCD AU| 3