Usb Board - HP EliteBook 850 G7 Maintenance And Service Manual

3. Remove the power connector cable from the computer (4).
Reverse this procedure to install the power connector cable.

USB board

To remove the USB board, use this procedure and illustration.
Table 6-5 USB board description and part number
Description
USB board
USB board cable (included in Cable Kit)
USB bracket (included in Bracket Kit)
Before removing the USB board, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover
3. Disconnect the battery cable from the system board (see
Remove the USB board:
1. Disconnect the cable from the ZIF connector on the USB board (1).
2. Remove the three Phillips M2.0 × 4.0 screws (2) that secure the board to the computer, and then remove
the bracket from the board (3).
(Preparation for disassembly on page
(Bottom cover on page 32).
32).
Battery on page 41).
Component replacement procedures
Spare part number
M05266-001
M05255-001
M05264-001
45