Table of Contents
Advertisement
4.
Remove the touchpad button board from the computer (4).
5.
Disconnect the cable from the reverse ZIF connector on the NFC module (1).
6.
Disconnect the system board cable from the ZIF connector on the touchpad (2).
7.
Disconnect the middle system board cable from the ZIF connector on the touchpad (3).
8.
Disconnect the touchpad button board cable from the ZIF connector on the touchpad (4).
9.
Remove the five Phillips M1.6 × 1.8 screws (5) that secure the touchpad to the computer.
10.
Remove the touchpad from the computer (6).
48
Chapter 6 Removal and replacement procedures for authorized service provider parts
Hide quick links:
Advertisement
Table of Contents
