Cypress CYW9P62S1-43012EVB-01 Manual page 19

22. Cypress Quad SPI Ferroelectric-RAM (CY15V104QSN, U4): The CY15V104QSN is a 4-Mbit
nonvolatile memory employing an advanced ferroelectric process. F-RAM is nonvolatile and per-
forms reads and writes similar to a RAM. It provides reliable data retention for 151 years and is
connected to the Quad SPI interface of the PSoC 6 MCU.
23. CYW43012 VBAT current measurement jumper (J8): An ammeter can be connected to this
jumper to measure the current consumed by the CYW43012 VBAT power domain.
24. CYW43012 VBAT power selection jumper (J9): This board supports VBAT voltages of 3.3 V
and 3.6 V. VBAT is 3.3 V when the jumper is not inserted and 3.6 V when the jumper is inserted.
25. PSoC 6 MCU user LEDs (LED8 and LED9): These two user LEDs can operate at the entire
operating voltage range of the PSoC 6 MCU. The LEDs are active LOW, so the pins must be
driven to ground to turn ON the LEDs.
26. PSoC 6 I/O header (J21, J22, J24): These headers provide connectivity to PSoC 6 MCU GPIOs
that are not connected to the Arduino compatible headers. Some of these I/Os are also
connected to on-board peripherals see
27. Wi-Fi/BT GPIO header (J23): This header brings out a few IOs of the CYW43012 for general
purpose applications.
28. PSoC 6 USB device connector (J7): The USB cable provided with the PSoC 62S1 Wi-Fi BT
Pioneer Kit can also be connected between this USB connector and the PC to use the PSoC 6
MCU USB device applications.
29. Optional USB Host power supply header (J10): This header provides an option to supply
external power to the PSoC 6 USB when used as a USB Host. This is not loaded by default.
30. KitProg3 status LED (LED2): This Yellow LED indicates the status of KitProg3. For details on
the KitProg3 status, see the
31. KitProg3 (PSoC 5LP) programmer and debugger (CY8C5868LTI-LP039, U2): The PSoC 5LP
device (CY8C5868LTI-LP039) serving as KitProg3, is a multi-functional system, which includes
a SWD programmer, debugger, USB-I2C bridge and USB-UART bridge. For more details, see
the KitProg3 User
See Hardware Functional Description on page 26
CYW9P62S1-43012EVB-01 PSoC 62S1 Wi-Fi BT Pioneer Kit Guide, Doc. # 002-28722 Rev. *B
Table 2-1 on page 13
KitProg3 User Guide.
Guide.
for pin mapping.
for details on various hardware blocks.
Kit Operation
19