Advertisement
Assembly / Operating Instructions
Setting up as Hearth Gate and Configure Gate
1.
Unpack the hearth gate on a stable surface making sure the
handle is on the top.
2.
Unfold the sections by pushing in
the button on the join and turning
the sections. If required, lift the top
section slightly while pushing the
button.
3.
Unfold the hearth gate into either a hexagon or square. The
markings on the top of the hinges indicate the position to unfold
each hinge for either hexagon or square configuration.
4.
The removable vertical bar has been fitted into the end section
by the manufacturers. Lift up the vertical bar and remove it by
sliding it out of the lower hinge.
5.
Remove the hinge cone from the upper hinge and the hinge cap
from the lower rail.
09
Advertisement
