Advertisement
Assembly / Operating Instructions
Installing wall fittings
1.
Attach the upper wall bracket to the cone hinge.
2.
Push the vertical bar up into the top hinge. Ensure the vertical
bar is inserted with the narrow section at the top.
3.
Slide the lower bracket onto the
removable bar and slide into the
lower bracket.
4.
Repeat steps 1-3 for other end of
gate.
5.
Place the configure gate in the
desired location.
6.
Rotate upper and lower brackets
until flush against the mounting
surface. With a pencil, outline
brackets on the mounting surface.
NOTE: Lower bracket is adjustable.
It can be moved up (maximum
15cm) to accomodate various
heights of floor moulding; and
by loosening screw, can adjust
widths to accomodate uneven wall
construction.
Max
15cm
11
Advertisement
