Advertisement
Assembly / Operating Instructions
Positioning as Hearth Gate around a fireplace
1.
When used as a hearth barrier around a fireplace, the distance between the fireplace /
hearth and gate sections must be a minimum of 75cm. The gate must never be setup in a
straight line. Should it not be possible to keep the recommended minimum distances, gate
extensions are available for purchase.
2.
When used as a hearth barrier around an open fire, the distance between the fireplace and
gate sections must be a minimum of 90cm. The gate must never be setup in a straight line.
WARNING: The minimum distances suggested between fireplace and gates are only
recommended distances sincce every fireplace / wood burning stove reaches different
temperatures. Test your unit at maximum heat output before final placing of the gate.
Place the gate according to the instructions at maximum heat output. If the gate is too hot to
touch, move gate further from the heat source than recommended.
To open the gate
Squeeze the handle tightly and slide
lock across at the same time. The gate
may then be opened in either direction.
To close the gate
Squeeze the handle tightly and slide the lock at the same time. Align
the gate and gate frame. Release the handle and the gate should lock
correctly. Please note that the gate will be properly secured when the
locking bar has also engaged in the bottom of the gate frame.
07
Advertisement
