Related Manuals for Childcare Alora Ashen
Summary of Contents for Childcare Alora Ashen
- Page 1 Alora Bedside Sleeper “Ashen” Model #036341-391 IMPORTANT: RETAIN FOR FUTURE REFERENCE, READ CAREFULLY...
- Page 2 SAFETY PRECAUTIONS Read all instructions before assembly and use of the bedside sleeper. Keep instructions for future use. WARNING NEVER LEAVE THE CHILD UNATTENDED IN THE BEDSIDE SLEEPER. IT IS DANGEROUS TO PLACE THE PRODUCT ON A RAISED SURFACE SUCH AS A TABLE. DO NOT USE THE PRODUCT IF ANY PART IS BROKEN, TORN, OR MISSING.
- Page 3 SAFETY PRECAUTIONS WARNING SUFFOCATION HAZARD - INFANTS HAVE SUFFOCATED IN GAPS BETWEEN EXTRA PADDING AND SIDE OF BASSINET/CRADLE AND ON SOFT BEDDING. USE ONLY THE PAD PROVIDED BY MANUFACTURER. NEVER ADD A PILLOW, COMFORTER OR ANOTHER MATTRESS FOR PADDING. If a sheet is used with the pad, use only the one provided by CNP Brands. To reduce the risk of SIDS, paediatricians recommend healthy infants be placed on their backs to sleep, unless otherwise advised by your physician.
- Page 4 SAFETY PRECAUTIONS NEVER leave your infant in the product without the TOP HORIZONTAL RAIL installed in the upper most position, unless securely attached to the adult bed. Failure to use this securing system will allow the bedside sleeper to move away from the adult bed and could result in the infant falling out of the bedside sleeper bedside bassinet.
- Page 5 CONGRATULATIONS Congratulations on your purchase of the Alora Bedside Sleeper - Ashen. This product has been designed and developed with safety, comfort and functionality in mind. Please take the time to read this manual carefully before using this product and keep it in a safe place for future reference.
- Page 6 Top frame, liner and mattress Lower Crossbar with removable cover Side Support Carry Bag Frame Foot Board Fixing belts with anchor plates Panel Middle support Front support frame There are no accessories recommended for use with this Childcare Bedside Sleeper.
- Page 7 ASSEMBLY CONTENTS Supplied loose in box continued: 23mm Bolts Allen Key Fully assembled product: A: Side Support Frame E: Lower Crossbar B: Mattress with removable cover F: Foot Board Panel C: Fixing Belt with anchor plate G: Lockable Wheels D: Top Frame & Liner H: Middle Support Frame &...
- Page 8 ASSEMBLY / OPERATING INSTRUCTIONS To assemble Frame & Bedside Sleeper Liner... Insert side support frame into the foot panel with the fixing belt connector on the same side as the adjustable sliding leg. Push the spring button in to allow the frame to lock into place.
- Page 9 ASSEMBLY / OPERATING INSTRUCTIONS To assemble Frame & Bedside Sleeper Liner continued... Wrap liner flaps around side support frames and secure with Velcro strips. Insert the Middle support frame in to the mounting on each side frame. Push frame in until secure, check for locking. Attach Front support bar to front of Middle support frame via push pins.
- Page 10 ASSEMBLY / OPERATING INSTRUCTIONS To lock Wheels... Press lock down to lock wheels in place. Lift lock up to release wheels. To adjust the height of Bedside Sleeper... The sleeper can be adjusted into 5 different height positions. Adjust the height by sliding the arrowed button upwards and pushing in on the lower button.
- Page 11 ASSEMBLY / OPERATING INSTRUCTIONS To fix to bed in Sleeper mode... Unzip the front panel on both sides. Slide the bar lever back and lift on both sides. Roll bar and unzipped front panel down. Secure with elastic tabs. Clip the fixing belts to the side support panels.
- Page 12 ASSEMBLY / OPERATING INSTRUCTIONS To fix to bed in Sleeper mode continued... Move the sleeper close to the parent’s bed and check the height of the sleeper compared with the mattress on the bed. The side support of the sleeper should always be placed close to the parent’s mattress and the mattress should always be aligned with the height of the side support for restraint of the sleeper.
- Page 13 ASSEMBLY / OPERATING INSTRUCTIONS To fix to bed in Sleeper mode continued... Before every use always check to make sure there is no space between the parent’s mattress and the side of the sleeper. If there is, pull the belts firmly to tighten until there’s no space and the permitted condition of use has been restored.
- Page 14 ASSEMBLY / OPERATING INSTRUCTIONS To assemble free standing Bassinet... Release the rolled up elastic tabs and roll out front panel. Line up the bar of the support frame as shown in the image. Locate the slots on the bar end and slide the bar into position, pushing down to lock.
- Page 15 ASSEMBLY / OPERATING INSTRUCTIONS To remove Lining (continued)... Slide the bar lever back and lift on both sides. Roll bar and unzipped front panel down. Remove front panel bar. Locate the zip on the rear of liner and unzip. Gently remove the lining from the top frame by sliding it off the top frame tubes on both sides.
- Page 16 HOW TO CARE FOR YOUR CHILDCARE SLEEPER Cleaning This product has been designed and developed with safety, comfort and functionality in mind. Please take the time to read this manual carefully before using this product and keep it in a safe place for future reference.
- Page 17 Baby, Evenflo, Good Baby, Lascal, Maclaren, Project Nursery, Summer Infant and Yookidoo. Our own brands, including Childcare, have gone from strength to strength in recent years. Childcare, and our premium brand bebe care, demonstrate our commitment to quality and continuing...
- Page 18 NOTES...
- Page 19 NOTES...
- Page 20 Distributed in Australia by CNP Brands Distributed in New Zealand by Wainhouse 20 Calarco Drive, Distribution Derrimut, VIC, 3026 2-6 Argyle St, Morningside, Customer Service 1300 667 137 PO Box 41-014, St Lukes, Auckland, New Zealand W: www.cnpbrands.com.au Customer Service: 0800 567 5000 E: info@cnpbrands.com.au F: www.facebook.com/CNPBrands E: helpline@wainhousedist.co.nz...