Advertisement
Assembly / Operating Instructions
Setting up as Hearth Gate and Configure Gate
6.
Connect the two sections by aligning the ends of the sections
and ensuring that the hinges drop together on both the top and
the bottom.
7.
Push the vertical bar up into the
top hinge and then slide into the
groove in the bottom hinge. Ensure
the vertical bar is inserted with the
protruding rod at the top.
Fitting the mattress
1.
Pass the elastic underneath three
of the hinges.
2.
Remove the vertical removable bar,
and loop the elastic around the slot
in the hinge before replacing the
vertical bar.
3.
Loop the remaining elastic
underneath and around the
remaining three hinges.
10
Advertisement
