Related Manuals for Childcare cosy time 036300-314
Summary of Contents for Childcare cosy time 036300-314
- Page 1 Cosy Time Sleeper “Grey” #036300-314 IMPORTANT: RETAIN FOR FUTURE REFERENCE, READ CAREFULLY...
- Page 2 SAFETY PRECAUTIONS Read all instructions before assembly and use of the Sleeper. Keep instructions for future use. WARNING NEVER LEAVE THE CHILD UNATTENDED IN THE SLEEPER. IT IS DANGEROUS TO PLACE THE PRODUCT ON A RAISED SURFACE SUCH AS A TABLE. DO NOT USE THE PRODUCT IF ANY PART IS BROKEN, TORN, OR MISSING.
- Page 3 SAFETY PRECAUTIONS WARNING SUFFOCATION HAZARD - INFANTS HAVE SUFFOCATED IN GAPS BETWEEN EXTRA PADDING AND SIDE OF BASSINET/CRADLE AND ON SOFT BEDDING. USE ONLY THE PAD PROVIDED BY MANUFACTURER. NEVER ADD A PILLOW, COMFORTER OR ANOTHER MATTRESS FOR PADDING. If a sheet is used with the pad, use only the one provided by CNP Brands. To reduce the risk of SIDS, paediatricians recommend healthy infants be placed on their backs to sleep, unless otherwise advised by your physician.
- Page 4 SAFETY PRECAUTIONS NEVER leave your infant in the product without the TOP HORIZONTAL RAIL installed in the upper most position, unless securely attached to the adult bed. Failure to use this securing system will allow the cosy time sleeper to move away from the adult bed and could result in the infant falling out of the bedside sleeper bedside bassinet.
- Page 5 CONGRATULATIONS Congratulations on your purchase of the Cosy Time Sleeper. This product has been designed and developed with safety, comfort and functionality in mind. Please take the time to read this manual carefully before using this product and keep it in a safe place for future reference.
- Page 6 In Australia, contact CNP Brands on 1300 667 137, in New Zealand contact Wainhouse Distribution on 0800 567 5000. Supplied loose in box: Mattress with Sleeper Frame removable cover Middle support Outer Travel bag frame There are no accessories recommended for use with this Childcare Cosy TIme Sleeper.
- Page 7 ASSEMBLY CONTENTS Fully assembled product: A: Sleeper Frame B: Middle Support Frame C: Fixing Belts D: Mattress with removable cover...
- Page 8 ASSEMBLY / OPERATING INSTRUCTIONS To assemble Frame and Bassinet Liner... Unzip the carry bag and remove the sleeper. Lay the sleeper frame face down on a flat surface. Holding the central supporting structure, turn both of the legs outward. Select the middle support frame and gently push it into the side slots as per image.
- Page 9 ASSEMBLY / OPERATING INSTRUCTIONS To adjust height of Sleeper... The sleeper can be adjusted to different height positions. To adjust the height, push the adjuster button then turn the cap clockwise to lower the sleeper or anti clockwise to raise the sleeper. Turn the cap to the desired height.
- Page 10 ASSEMBLY / OPERATING INSTRUCTIONS To fix to bed in Sleeper mode (continued)... Move the sleeper close to the parent’s bed and check the height of the sleeper compared with the mattress on the bed. The side support of the sleeper should always be placed close to the parent’s mattress and the mattress should always be aligned with the height of the side support for restraint of the sleeper.
- Page 11 ASSEMBLY / OPERATING INSTRUCTIONS To fix to bed in Sleeper mode (continued)... Before every use always check to make sure there is no space between the parent’s mattress and the side of the sleeper. If there is, pull the belts firmly to tighten until there’s no space and the permitted condition of use has been restored.
- Page 12 ASSEMBLY / OPERATING INSTRUCTIONS To assemble free standing Bassinet... Release the elastic tabs and zip up both sides of sleeper. Re-insert bar into top of side panel. Line up the bar of the support frame as shown in the image. Gently push the bar until it ‘clicks’...
- Page 13 ASSEMBLY / OPERATING INSTRUCTIONS To remove Lining (continued)... Gently remove the lining from the upper tubular structure, making sure not to damage the internal part of the lining. To disassemble Sleeper... Follow the steps ‘To remove Lining... ’ on page 14 to remove the sleeper lining from the structure.
- Page 14 HOW TO CARE FOR YOUR CHILDCARE Sleeper Cleaning This product has been designed and developed with safety, comfort and functionality in mind. Please take the time to read this manual carefully before using this product and keep it in a safe place for future reference.
- Page 15 These include distribution lines for 4moms, Cybex, Evenflo, Good Baby, Lascal, Maclaren, Motorola, OiOi and Summer Infant. Our own brands, including Childcare, have gone from strength to strength in recent years. Childcare, and our premium brand bebe care, demonstrate our commitment to quality and continuing...
- Page 16 Distributed in Australia by CNP Brands Distributed in New Zealand by Wainhouse 20 Calarco Drive, Distribution Derrimut, VIC, 3030 2-6 Argyle St, Morningside, Customer Service 1300 667 137 PO Box 41-014, St Lukes, Auckland, New Zealand W: www.cnpbrands.com.au Customer Service: 0800 567 5000 E: info@cnpbrands.com.au F: www.facebook.com/CNPBrands E: helpline@wainhousedist.co.nz...