Table of Contents
Advertisement
Operation
Note: Determine the left and right sides of the machine
from the normal operating position.
WARNING
To avoid personal injury, follow these procedures:
• Become familiar with all operating and safety
instructions in the Operator's Manual for the
mower before using this attachment.
• Never remove the discharge tube, bags, bagger
hood, or the chute while the engine is running.
• Always shut the engine off and wait for all
moving parts to stop before clearing an
obstruction from the bagging system.
• Never perform maintenance or repairs while the
engine is running.
Emptying the Grass Bags
Be careful when lifting or handling a grass bag that is full. To
empty the grass bags:
1. Park the machine on a level surface.
2. Disengage the blade-control switch, engage the parking
brake, and move the motion-control levers outward to
the
-
NEUTRAL
LOCK
3. Shut off the engine and remove the key.
4. Raise the bagger hood
5. Compress the debris into the bags.
6. With both hands, lift up on the bag and unhook it from
the retaining bracket, empty the bag.
7. Repeat the procedure for the other bag.
8. Install the bags by sliding the bag frame hooks onto the
retaining brackets
(Figure
position.
(Figure
32).
G005758
Figure 32
33).
3
G005672
1. Bag
2. Bagger frame
9. Lower the bagger hood onto the bags.
Clearing Obstructions from
the Bagger System
WARNING
When the bagger is in operation, the blower is
rotating and can cut off or injure hands and fingers.
• Before adjusting, cleaning, repairing and
inspecting the blower, and before unclogging
the chute, turn off the engine and wait for all
moving parts to stop. Remove the key.
g005758
• Use a stick, not your hands, to remove an
obstruction from the blower and tube.
• Keep your face, hands, feet, and any other part
of your body or clothing away from concealed,
moving, or rotating parts.
1. Park the machine on a level surface.
2. Disengage the blade-control switch, engage the parking
brake, and move the motion-control levers outward to
the
NEUTRAL
19
1
2
4
Figure 33
3. Retaining bracket
4. Bag frame hook
-
position.
LOCK
g005672
Advertisement
Table of Contents
