Removing The Grass Deflector And Belt Cover - Toro E-Z Vac TimeCutter HD 79345 Operator's Manual

Figure 3
Cutaway view
1. Weight-tray mounts
2. Bolt (3/8 x 1-1/4 inches)
3. Use the 2 carriage bolts (3/8 x 1 inch) and flange nuts
to secure the weight tray to the mounts
Figure 4
1. Carriage bolt (3/8 x 1 inch) 3. Weight tray
2. Weight-tray mount
4. Insert the suitcase weight into the weight tray with the
groove side facing toward the front of the machine
(Figure 5).
g196533
3. Flange nut (3/8 inch)
4. Self-tapping bolt (5/16 x
3/4 inch)
(Figure 4).
g196549
4. Flange nut (3/8 inch)
1. Retaining rod
2. Weight tray
5. Insert the retaining rod into the tray and rotate it into
the locked position
Important: Remove the suitcase weight whenever you
remove the bagger attachment.
3
Removing the Grass
Deflector and Belt Cover
No Parts Required
Procedure
WARNING
An uncovered discharge opening could allow the
lawn mower to throw objects in the operator's or
bystander's direction and result in serious injury.
Also, contact with the blade could occur.
Never operate the lawn mower unless you install a
mulch plate, discharge deflector, or grass-collection
system.
Inspect the grass deflector for damage before each use.
Replace any damaged parts before use.
1. Disengage the spring from the notch in the deflector
bracket and remove the cotter pin (international models
only), slide the rod out of the welded deck brackets,
spring, and discharge deflector
7
Figure 5
3. Suitcase weight
(Figure 5).
(Figure 6).
g196560