Table of Contents
Advertisement
Step 4 – Connect hoses
1. Fit John Guest fittings to outlet connections -
Chilled, Sparkling and Recirculation (2).
3. Measure and cut to length hoses from chiller
outlet fittings. Fit JG stop valves and 3/8 to 5/16
straight adaptors ready for tap/font connection
(Note: ambient T-off between filter and chiller).
5. Fit the 3/8 x 5/16 JG fittings to the two black
recirculation hoses in the tap. Connect two
recirculation hoses between tap and chiller, and
cut to length.
22
805812NZ v1.04 05.20 HydroChill Install Instructions
Installation
2. Add elbows to suit your installation.
4. Once tap is installed fit Sparkling / Chilled
/Ambient lines with 3/8 to 5/16 adaptors to
outlets from chiller.
Tap
Advertisement
Table of Contents
