Mocka Watson Bookcase Assembly Instructions page 3

Watson Bookcase
Assembly Instructions
3
Attach 2 x wall straps (W) to panel [1] using 2 x screws (Y). Attach
panel [3] as shown and secure with 24 x screws (C). Tighten with a
screwdriver.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
4
Move the unit into the desired location up against a wall, do not drag.
Use a drill to create a small hole lining up with the top of the 2 x safety
straps (W). Fasten to the wall using 2 x wall anchors (X), 2 x washers (Z)
and 2 x long screws. Ensure the unit is balanced and steady before use.
You're done, enjoy!
3