Kioti CS2220H Manual page 94

5

- cS2220H(S)/cS2520H(S)
(1) Hand Throttle lever
¡ "Increase" "Decrease"
6. Set the hand throttle lever into the
neutral position.
CS2220H(S),CS2520H(S)-미국향-05.ind6 6
tb3O430A
(1) key Switch
(A) Stop (B) Acc
(c) oN (D) Start
7. Insert the key into the key switch
and turn it "oN" and maintain it un-
til the preheat lamp is turned off.
While pre-heating, the pre-heat
lamp on the dash board illumi-
nates.
It is normal that the charge warning
lamp and engine oil pressure warn-
ing lamps come on when the key is in
"oN" position before the engine start.
NOTE
operating principle of auto pre-
heating system.
. The glow plug lamp comes on

for 6 seconds and then goes off
when the key switch is turned to
the "Start" or "Stop" position.
The engine should be started
within 6 seconds after the glow
plug lamp goes off. After the en-
tb3O418A
gine is started, post-heat is per-
formed for 15 seconds with the
key switch in the "oN" position.
The after-heating is a function

to keep the glow plugs activated
for approx. 15 seconds after
the engine is started in order to
enhance the engine combus-
tion performance and to reduce
harmful emissions right after en-
gine start.
2020-03-31 오후 4:45:58