Kioti CS2220H Manual page 124

6
10
- cS2220H(S)/cS2520H(S)
WARNINg
Make sure that the PTO safety

cover is in its position before
driving the PTO shaft.
Never go close to the rotating

PTO or tractor PTO shaft. A se-
vere accident can happen.
Before driving an implement

with the PTO, always make
sure that all bystanders are
well away from the tractor.
When using the PTO drive with

a stationary tractor, always
make sure that the gears are
in neutral and that the parking
brake is applied.
surrounding parts should not

interfere with the tractor PTO
and PTO shaft.
CS2220H(S),CS2520H(S)-미국향-06.ind10 10
WARNINg
Before starting up any PTO-

driven implement hitched to
the three-point linkage, lift the
implement to its full height and
check that at least 1/4 of the
total length of the telescopic
section of the drive shaft is en-
gaged.
(1) PTO cover
(A) Allowable angle of universal joint : 50˚
Refer to the chart below when install-
ing of an universal joint.
The type of PTO Allowable angle
shaft of universal joint
"
SAE 1-3 / 8 6
50 degree
splines
M55O626A
2020-03-31 오후 4:51:51