Engine Troubleshooting - Kioti CS2220H Manual

9

- CS2220H(S)/CS2520H(S)
This troubleshooting chart summarizes simple service items for users who are familiar with mechanical systems.
For more detailed service items, contact your local KioTi Dealer.

EnginE TroublEshooTing

1. When engine is difficult to
start
CS2220H(S),CS2520H(S)-미국향-09.ind2 2
causE
Fuel is thick and doesn't flow.

Air or water mixed in fuel sys-

tem.
Thick carbon deposits on

orifice of injection nozzle.
Valve clearance is wrong

Engine oil become thick in

cold weather and engine
cranks slow.
Actuator driver malfunction

Speed sensor malfunction

counTErmEasurEs
Check the fuel tank and fuel filter.

Remove water, dirt and other impurities.

All fuel will be filtered by the filter, if there should be water of

other foreign material on the filter, replace the filter.
If air is in the fuel filter or injection lines, the fuel pump will

not work properly.
To attain proper fuel injection pressure, check carefully for

loosened fuel cap nut, etc.
Loosen air vent screw over fuel filter and fuel injection pump

to eliminate all the air in the fuel system.
This is caused when water or dirt is mixed in the fuel. Clean

the nozzle injection piece, being careful not to damage the
orifice.
Check to see if nozzle is working properly or not, if not,

install a new nozzle.
Contact KioTi dealer.

Change grade of oil according to the weather (temperature).

Check the actuator and wire connection

C heck the speed sensor and wire connection.

Adjust the air gap between ring gear and the tip of sensor
2020-03-24 오후 3:37:58