Corded Buttonhole - Janome 5300QDC Instruction Book

q w e
4
z
q
x
e
r
c

Corded Buttonhole

q
w Thread tension dial: 1 to 4
e Presser foot:
z
the cord used.
the spur at the back of the buttonhole foot. Bring the
ends toward you under the buttonhole foot, clearing
the front end.
buttonhole foot to hold them tight.
Lower the needle into the garment where the
buttonhole will start, and lower the foot.
q
w
w Forks
x
Each side of the buttonhole and the bartacks will be
sewn over the cord.
Remove the fabric from the machine, and cut the
sewing threads only.
e Needle thread
r Bobbin thread
c
Thread the each end of the cord through a hand-
sewing needle. Then draw the both ends to the wrong
side of the fabric and knot.
NOTE:
stitched on the fabric and cannot be pulled.
41
Automatic buttonhole foot R