Table of Contents
Advertisement
q
w
BH
z
q
x
c
e
r
t
Corded Buttonhole
q Stitch pattern:
w Presser foot:
e Thread tension dial: 1–5
r Stitch length:
t Stitch width:
z With the buttonhole foot raised, hook the
filler cord on the cord spur at the back of the
buttonhole foot.
Bring the ends toward you under the
buttonhole foot until they clear the front end.
Hook the filler cord into the forks on the front of
the buttonhole foot to hold them tight.
q Spur
w
w Forks
x Lower the needle into the garment where
the buttonhole will start and lower the foot.
Depress the foot control gently and sew the
buttonhole.
Each side of the buttonhole and the bartacks
will be sewn over the cord.
* The sewing steps are the same as the automatic
buttonhole sewing.
c Remove the fabric from the machine and cut
the sewing threads.
Pull the left end of the filler cord to tighten it.
Thread the end through a darning needle, draw
to the bottom side of the fabric and cut.
46
R: Automatic BH foot
0.5–1
3–5
Advertisement
Table of Contents
