Reverse Button; Auto-Lock Button - Janome 5300QDC Instruction Book

e
w
q
Machine Operating Buttons
q Start/Stop button
Press this button to start or stop the machine.
stitches, and it then runs at the speed set by the speed
control slider.
The machine runs slowly as long as this button is being
pressed.
NOTE:
control is connected to the machine.
will blink if you start the machine with the presser
foot in the up position. Lower the presser foot and
press the start/stop button.
w Reverse button
The machine will sew in reverse as long as the
reverse button is pressed. Release the button to sew
forward.
When the machine is stopped and foot control is
disconnected, the machine will sew in reverse slowly
as long as the reverse button is pressed. Release the
button to stop the machine.
There will be particular functions of the reverse button
when patterns shown above are selected. Refer to
pages 30, 44 and 45 for instructions.
If you press the reverse button when sewing any other
patterns, the machine will immediately sew locking
stitches and automatically stop.
e Auto-lock button
Press the auto-lock button to sew a locking stitch
immediately. The machine will automatically stop.
Press the auto-lock button to sew a locking stitch
at the end of current pattern. The machine will
automatically stop.
9