Janome 5300QDC Instruction Book page 23

z
c
v
b
x
n
z
x
c
v b
t
w
w
e
r
y
Threading the Machine
q
CAUTION:
Turn OFF the power switch before threading the
machine.
z Turn the power switch off.
Draw the end of the thread around the upper thread
guide.
x While holding the thread near the spool w, draw
the end of the thread down around the check spring
holder e.
w
e Check spring holder
c Firmly draw the thread up from right to left over the
take-up lever, and down into the eye of take-up lever.
r Eye of take-up lever
v b
thread guide from the right.
t Lower thread guide
y Needle bar thread guide
n Use the needle threader to thread the needle (see
page 22).
21
Raise the presser foot. Press the
needle up/down button q to raise
the thread take-up lever to its
highest position.
q Needle up/down button