Janome 5300QDC Instruction Book page 26

z
x
w
e
z
x
c
Selecting Stitch Patterns
Mode 1
You can select the following stitch patterns directly by
pressing the number keys q.
q Number keys
q
Example: To select stitch pattern 4 in mode 1
z When the power switch is turned on, the direct pattern
selection (mode 1) is set automatically.
x Press the pattern key 4 to select the stitch pattern 4.
Now pattern 4 in mode 1 is selected.
Modes 2 – 5
mode key w to select your desired mode. Each time
you press the mode key, the mode number e indicated
on the left side of the screen will change, and the mode
changes as follows;
The mode number e indicates the selected mode
number. To refer to the modes and their available stitch
patterns for this sewing machine, check the stitch
reference chart (refer to page 5) or stitch chart on pages
77-78.
Enter the 2-digit number of the desired stitch pattern with
the corresponding number keys.
w
e
Example: To select stitch pattern 70 in mode 3
z Turn the power switch on.
Press the mode key twice to select mode 3.
x Press the number keys on the touch panel.
First press key 7 and then press key 0.
c Now pattern 70 in mode 3 is selected.
24