Janome 5300QDC Instruction Book page 62

q w e
c
B
z
x
n
Stitch Patterns for Twin Needle Sewing
MODE 1, 2
MODE 3
MODE 4
A
v
q
b
m
Twin Needle Sewing
q
w Thread tension dial: 3 to 6
e
NOTE:
the stitches before you begin to sew.
needle sewing.
Use the extra spool pin for twin needle sewing.
Place two spools of thread as shown.
Draw both threads from the spools and thread them
through the points from z to c.
then pass through points and b, n as illustrated.
guide v, then pass it through the needle hole m.
tangled.
Turn the power switch on and select the desired
pattern.
Press the twin needle button q, draw the both threads
to the back or left of the foot.
q Twin needle button
NOTE:
needle and turn the fabric.
sewing and press the twin needle button, the twin
needle mark will blink on the LCD display and the
caution buzzer sound.
needle mode.
trimming threads.
needle sewing.
60
lower thread guide v,
lower thread