Foot Control; Extension Table - Janome 5300QDC Instruction Book

w
r
e
q
t
r
e
q
8
Controlling Sewing Speed
Speed control slider
according to your sewing needs.
To increase sewing speed, move the slider to the right.
To decrease sewing speed, move the slider to the left.

Foot control

Depress the foot control to start the machine.
The further down you press on the foot control, the faster
the machine runs.
The maximum sewing speed can be varied by the speed
control slider.
NOTE:
The machine will not run and the presser foot mark
will blink if you start the machine with the presser foot
in the up position. Lower the presser foot and press
the foot control.

Extension Table

The extension table provides an extended sewing area
and can be easily removed for free-arm sewing.
Detaching the table
Pull the table away from the machine, as illustrated.
q Extension table
Attaching the table
the guides into the holes until the table snaps into the
machine.
w Free-arm
e
r Hole
Accessory storage
Accessories are stored inside the extension table.
Pull the lid toward you to open the accessory storage t.
t Accessory storage
Free-arm Sewing
Free-arm is useful for sewing tubular garments and for
darning knee or elbow areas.
q Free-arm