Janome 5300QDC Instruction Book page 36

Hide thumbs Also See for 5300QDC:
Table of Contents

Advertisement

q
w
e
4
q
w
e
4
q
w
e
q
q
Knit Stitch
q
w Thread tension dial: 3 to 6
e Presser foot:
excess close to the stitching. Be careful not to cut the
stitches.
Double Overedge Stitch
q
w Thread tension dial: 3 to 7
e Presser foot:
This stitch is excellent for sewing fabrics that tend to fray
extensively such as linens and gabardines.
Two rows of zigzag stitches are simultaneously sewn
over the edge to insure that your seams will not ravel.
the foot.
q
CAUTION:
When using an overedge foot, make sure to set the
stitch width at 5.0-7.0, otherwise the needle may hit
the wires on the foot.
Overlock Stitch
q
w Thread tension dial: 6 to 8
e
NOTE:
not be displayed on the LCD when the overlock stitch
pattern is selected. To sew the overlock stitch pattern,
to a commercial overlocking machine for a professional
look.
Place the fabric edge next to the guide of the foot and
sew.
q
34
Zigzag foot A
Overedge foot C

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents