Storing Speed Dial Numbers - Comdial DXP Plus User Manual

GCA70-314
9.2

Storing Speed Dial Numbers

To store an outside number as a speed dial number,
1. Press INTERCOM.
2. Dial
3. Press programmable button (or 1–0 on keypad) to choose stor-
age location.
NOTE: Remember, you can store another number at a second level at a
programmable button by first pressing HOLD.
4. Press line button, or dial 01–16 to select line groups
1–16, or dial 00 for system to select line.
5. Dial number you want to store (up to 16 digits that can include
and #). To store hookflash in a number sequence, press TAP;
press HOLD to store pause (only if needed).
6. Press TRANSFER/CONFERENCE to store number.
7. Press next programmable button, and dial another number to
store.
8. Repeat previous step until you have stored all numbers.
9. Press SPEAKER to end.
NOTE: When you are programming emergency numbers and making
test calls to emergency numbers, the Federal Communications
Commission (FCC) requires that you do the following: (1)
remain on the line and briefly explain to the dispatcher the
reason for the call; (2) always make test calls during the
off-peak hours, such as early morning or late evening.
Programming Your Telephone
1.
Non-LCD Station User's Guide 9–3