Storing Speed Dial Numbers - Comdial Impact SCS 8212S Series User Manual

Programming Your Telephone
9.2

Storing Speed Dial Numbers

To store an outside number as a speed dial number,
NOTE: Programming overwrites existing speed dial numbers at button
locations.
1. Press INTERCOM.
2. Dial 1.
3. Press programmable button or dial pad button to choose storage
location (remember, to access second level storage at a
programmable button, press SHIFT first.)
4. Make your speed dial route selection choice from the following list:
•
press line button to select outside line,
•
dial 00 to select prime line or last line used,
•
dial 01–16 to select line group,
•
press INTERCOM button or dial 8 to select intercom.
5. Dial number (up to 16 digits long—include
NOTE: You may need a pause between numbers to compensate for
differences in response time between your system and the host
system (ask your attendant about this). To store a pause, press
HOLD, then continue dialing. If your system is behind a host
system that needs a hookflash to access a feature, press TAP to
store a hookflash, then continue dialing.
6. Press TRANSFER/CONFERENCE to store number.
7. Press next location button and store next number, repeat previous
steps until all numbers are stored,
—OR—
press SPEAKER to end.
9 – 2 Station User's Guide
GCA70–313
and # if needed).