Related Manuals for HIKVISION DS-DN46B1MF
Summary of Contents for HIKVISION DS-DN46B1MF
- Page 1 LCD Display with Modular Bracket • Installation Guide LCD Display with Modular Bracket Installation Guide...
- Page 2 Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou Hikvision Digital Technology Co., Ltd. or its subsidiaries (hereinafter referred to be “Hikvision”). This user manual (hereinafter referred to be “the Manual”) cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of Hikvision.
- Page 3 LCD Display with Modular Bracket • Installation Guide Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
-
Page 4: Applicable Models
LCD Display with Modular Bracket • Installation Guide Applicable Models This manual is applicable to LCD displays. Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Provides additional information to emphasize or supplement important points of the main text. - Page 5 LCD Display with Modular Bracket • Installation Guide When the product is mounted on wall or ceiling, the device shall be firmly fixed. Do not bend, pull or drag the power cord, and do not change the position of the power cord randomly.
-
Page 6: Chapter 1 Preparation For Installation
LCD Display with Modular Brackets Installation Guide Chapter 1 Preparation for Installation 1.1 Precautions To ensure safety, please read this manual carefully before the installation. Store this installation guide for future reference. Ensure the wall is solid and strong enough to bear the weight of the LCD displays. ... -
Page 7: Packing List
LCD Display with Modular Bracket • Installation Guide 1.4 Packing List The following table lists the packing list for one LCD display package. Item Quantity Item Quantity Modular Bracket Hook Supporting Base Plate Base Fixing Box Drawbar M6×14 mm Phillips Screws M8×90 mm Expansion Bolts (for securing drawbars) M6×30 mm Hex Socket Head... - Page 8 LCD Display with Modular Bracket • Installation Guide M10×50 mm Hex Head Cap M8×75 mm Hex Socket Head Screws Cap Screws M10×20 mm Hex Head Cap M10×75 mm Hex Head Cap Screws Screws M16×135 mm Foot crews...
-
Page 9: Chapter 2 Installation
LCD Display with Modular Bracket • Installation Guide Chapter 2 Installation This section uses a 46-inch LCD video wall with 2×2 scale as an example to describe how to mount LCD displays with modular brackets. 2.1 Mount the Base Step 1 Take out the base and place the base face down, and then secure the supporting base plate into the base with four M6×135 foot screws. - Page 10 LCD Display with Modular Bracket • Installation Guide Figure 2-2 Mount the Foot Screws Ensure that the top of the foot screws is lower than the sides of the base. Step 3 Stand the base with the logo side facing the front. Figure 2-3 Stand the Base...
- Page 11 LCD Display with Modular Bracket • Installation Guide Step 4 Join the bases and secure them with M10×75 mm screws. Figure 2-4 Join the Bases Step 5 Adjust the flatness and tightness of the joined base. 1) Use a measuring tool such as a level to adjust the flatness of the joined base. 2) Tighten or loosen the foot screws to adjust the tightness of the joined base.
- Page 12 LCD Display with Modular Bracket • Installation Guide 1) Secure the brackets in the upper row to those in the lower row with M8×75 mm screws. 2) Secure the two fixing boxes to the brackets in the upper row with M8×45 mm screws. Figure 2-5 Mount Modular Brackets 2.3 Mount Drawbars Use a Plumb Bob for vertical reference and secure the drawbars of the brackets to the wall.
- Page 13 LCD Display with Modular Bracket • Installation Guide Figure 2-6 Mount Drawbars 2.4 Mount Displays 2.4.1 Mount Hooks Step 1 Take out one display. Align the mounting holes of the hooks with the display and secure the hooks to the display with M6×14 mm Phillips screws.
- Page 14 LCD Display with Modular Bracket • Installation Guide Figure 2-7 Secure Hooks Step 2 Screw the M6×30 mm hex socket head cap screws into the top of the hooks for later adjustment. M6×30 Figure 2-8 Mount Screws Step 3 Repeat the preceding steps to mount hooks to the other three displays. 2.4.2 Mount Displays onto Brackets Step 1 Hold one display and attach the hooks to the slots of the adjusting screws.
- Page 15 LCD Display with Modular Bracket • Installation Guide Figure 2-9 Mount Displays Figure 2-10 Screw Position...
- Page 16 LCD Display with Modular Bracket • Installation Guide Step 2 Repeat step 1 to mount the other three displays onto the brackets. Step 3 Adjust the displays. After finishing one row, make preliminary adjustments of the flatness and verticality of the displays. 1) Tighten or loosen the L-shape adjusting screws on the rear to adjust the flatness of the displays.
-
Page 17: Verify The Installation
LCD Display with Modular Bracket • Installation Guide 2.6 Verify the Installation The video wall is flat in surface. The whole screen is vertical at 90 degrees and the deviation should not be greater than 2 mm. The whole screen is horizontal at 180 degrees and the deviation should not be greater than 2 ... - Page 18 LCD Display with Modular Bracket • Installation Guide UD14670B...
Need help?
Do you have a question about the DS-DN46B1MF and is the answer not in the manual?
Questions and answers