Page 1
19-inch LCD Display Unit User Manual M6MM0M1806W001...
Page 2
Thank you for purchasing our product. If there is any question or request, please do not hesitate to contact us. This manual is applicable to DS-D5019 Series monitors. This manual may contain several technically incorrect places or printing errors, and the content is subject to change without notice.
Regulatory Information 2002/96/EC (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info.
Page 4
The content of this manual is furnished for informational use only, is subject to change without notice, and should not be construed as a commitment by Hikvision Digital Technology Co., Ltd. (Hikvision). Hikvision assumes no responsibility or liability for any errors or inaccuracies that may appear in the book.
Chapter1. Introduction 1.1 Key Features Support 1366× 768 HD display; User-friendly operation menu; Three image modes to adapt different environment; 1 channel HDMI 1.3 input interface; Support software spread-spectrum technology to reduce EMI radiation; Standby Power Consumption is lower than 0.5W.
Chapter2. Device Interfaces Figure 2.1 Rear Panel of Device Interfaces Description POWER IN Power Input HDMI IN HDMI Digital Signal Input VGA IN VGA Analog Signal Input...
Chapter3. Panel Keys Keys on lower right corner of the display unit panel are shown in the Figure 3.1 Keys on the Display Unit. Figure 3.1 Keys on the Display Unit The functions of the keys on lower right corner of the display unit vary according to different situations. The functions are shown in the flow chart below:...
Chapter4. Basic Operation 4.1 Contrast Turn on the display unit when the power supply is on and input source is confirmed. ◄ Press key of the remote controller to enter the menu press ◄ or ► to adjust the value as shown on the right.
4.4 Main Menu 4.4.1 Image Settings Purpose: You can adjust the picture parameters by switching image modes and adjust the values of contrast, brightness, color temperature, auto adjust, color adjust. Steps: Press Menu key to enter the main menu interface as shown below. 2.
4.4.2 Image Adjustment Purpose: When the input source is selected VGA, you can adjust the VGA parameters. It is for adjusting VGA H position, V Position, clock and phase. Steps: 1. Press Menu key to enter the main menu interface. 2.
4.4.3 OSD Setting Purpose: You can set the language, blending and OSD duration of the menu. Steps: 1. Press MENU key to enter the main menu interface. 2. Press ◄ key twice and press MENU key to enter the 【Language】 interface, press ◄ or ► to switch the language you want.
4.4.4 Other Settings Purpose: You can set Mode, Signal Source, Aspect Ratio, DCR. Steps: 1. Press MENU key to enter the main menu interface. 2. Press triple◄ key and press MENU key to enter the Mode interface, press ◄ or ► to switch the mode between PC/GAME/MOVIE.
4.4.5 Reset Setting Purpose: You can reset settings to the factory defaults. Steps: 1.Press MENU key to enter the main menu interface. 2.Press ◄ key 4 times and press MENU key to reset settings to the factory defaults. Figure 4.4.5 Reset Setting...
Appendix: Specifications Device Model DS-D5019 Series Display Type TFT-LED Backlight Screen Size 18.5" Dot Pitch 0.300× 0.300 mm Max Resolution 1366× 768 Best Operation Resolution 1366× 768@60Hz Brightness 200cd/m² Contrast 600:1 Response Time Color 16.7M Viewable Area 409.8× 230.4mm Viewing Angle Horizontal 90°...