Schulte Classica Series Manual page 74

5. Toe Kick
• Attach Toe Kick (5" X 24") to same side panel.
• Align predrilled holes on Toe Kicks with
Connecting Bolts in side panel.
• Lower Toe Kick into place.
• Turn Cam Locks clockwise ¼ turn until snug.
6. Side Panel
• Attach remaining Side Panel to cabinet.
• With bolts and dowels facing downward,
align remaining side panel over pre-drilled
holes in top, center, bottom and toe kick
panels.
• Lower side panel into place, turn Cam
locks clockwise ¼ turn until snug.
• Stand completed Cabinet B upright.
7. Connecting Bolts
• Install connecting bolts into hole
locations on face of Cabinet A side
panel. (These holes were created
in step 2 of Island Cabinet A
Assembly.)
• Tighten Bolts using #2 Phillips
screwdriver. If using drill with a
Phillips bit, set on low to medium
torque.
8. Attach Cabinet B to Cabinet A
• Align pre-drilled cam lock holes in
Cabinet B side panels with
connecting bolts on Cabinet A.
• Slide Cabinet B into place. Turn
each cam-lock clockwise ¼ turn
until snug.
• Position completed Melamine
Island Cabinet A/B into closed
space.
SCHULTE Classica Installation Training
Location
Location
Location
(Front View)
Probe
Probe
Probe
(Side View)
Page 74