Download Print this page

Advertisement

Quick Links

Training Manual
Product Description ......................................................................... 2
Design Fundamentals ................................................................... 11
Space Planning Fundamentals ..................................................... 15
Basic Installation ........................................................................... 17
Technical Specification ................................................................. 20
Melamine/Laminate Color Matches............................................... 29
Warranty........................................................................................ 30
1
SCHULTE freedomRail Training Manual
Page

Advertisement

loading

Summary of Contents for Schulte freedomRail

  • Page 1: Table Of Contents

    Training Manual Product Description ................. 2 Design Fundamentals ..............11 Space Planning Fundamentals ............. 15 Basic Installation ................17 Technical Specification ..............20 Melamine/Laminate Color Matches..........29 Warranty..................30 SCHULTE freedomRail Training Manual Page...
  • Page 2: Product Description

    Product Description Hanging Rail •The Hanging Rail is the primary support component of the freedomRail Garage system. Once mounted to the wall, all other components simply hang from the Hanging Rail. Constructed of heavy duty 12 gage steel with a durable baked-on epoxy finish.
  • Page 3 •Rod Stops provide a convenient and secure "stop" for hangers gliding along the Clothes Rod. •Snap easily into open ends of Clothes Rod, secured with a simple twist, and is finished in either chrome or nickel for an upscale look. •Part Number: 7913-1510-(34,36) SCHULTE freedomRail Training Manual Page...
  • Page 4 •Big O-Box with Two Drawers (two 6 1/2" drawers) -Part Number: 7315-3230-(11,24,27) •Big O-Box with Three Drawers (one 6 1/2" and two 4 3/4" drawers with built-in lock) -Part Number: 7315-3330-(11,24,27) •Big O-Box Doors -Part Number: 7315-3530-(11,24,27) •Big O-Box Backs -Part Number: 7513-2921-(11,24,27) SCHULTE freedomRail Training Manual Page...
  • Page 5 •Used to hold an upright onto a door by capturing the top and bottom or a door •Can be adjusted to fit most size doors •Holds accessories that attach to a single upright •Available in White only •Part Number: 7215-1800-11 SCHULTE freedomRail Training Manual Page...
  • Page 6 Over The Door Hook –Can Holder •Can be attached to the Spanner or a single Upright to allow versatility •Holds smaller cans and items in place •Patented locking system ensure secure fit •Available in White only •Part Number: 7215-1860-11 SCHULTE freedomRail Training Manual Page...
  • Page 7 •Available in 6” and 16” Sizes •Part Number: 7510-(1606,1616)-34 fR Canvas Liner for Baskets •Fits easily in O-Box Chrome Baskets •Fits in 6” and 16” Baskets •Comes in Chocolate and Wheat colors •Part Number: 7513-(2406,2416)-(13,18) SCHULTE freedomRail Training Manual Page...
  • Page 8 •Attaches to Uprights by clipping into place •Sold in pairs •Available in White •Part Number: 7913-1408-11 Valet Rod •Mounted on a Solid Shelf Bracket •Used to Set clothes out for later time •Available in White and Nickel •Part Number: 7513-1414-(11,45) SCHULTE freedomRail Training Manual Page...
  • Page 9 Profile Shelf End Cap Assortment Pack (#6600) • Pack contains 3 sizes of End Caps (small, large, and double) to finish off the ends of any cut Profile shelf. Each package contains 12 Caps, or enough to finish 4 cut sides. SCHULTE freedomRail Training Manual Page...
  • Page 10 Black. Open Slide® II • Ventilated shelving that provides a durable hanging solution that also offers adjustability options when mounted onto freedomRail components. The shelf is offered in 12” and 16” versions. Shelf End Caps • Provide the right assortment of End Caps to finish off the cut edge of the Open Slide II shelving when it needs to be cut to fit a particular size space.
  • Page 11: Design Fundamentals

    Design Fundamentals Traditional Planning - versus - freedomRail Planning SCHULTE freedomRail Training Manual Page...
  • Page 12 100 lbs. per linear foot. Tie Rack Note: If you plan to use a freedomRail Tie Rack (mounted into Upright. This could occur easily in the middle of a longer shelving run, or by insetting the Upright 4” from the end of a Shelf.
  • Page 13 • 84" and 42" for adult short-hang (b). • 84", 68", 56", 42", 28", and 14" for shelf stack in closet, pantry or linen (c). • 84", 56", and 28" for child's triple-hang (not shown). SCHULTE freedomRail Training Manual Page...
  • Page 14 • Overlaps: allow shelves to overlap by as much as 2”. For example, a 46” closet could be designed using two (2) 24” shelves that overlap 2”, rather than having to cut down a 48” long shelf (b). SCHULTE freedomRail Training Manual Page...
  • Page 15: Space Planning Fundamentals

    2 feet for stacked shelves or O-Boxes. However, with freedomRail, it is very easy to move beyond the 50/25/25 rule. For example, in a man’s closet, there may be little need for long hang spaces, so revise your plan to accommodate a higher percentage of short hang garments.
  • Page 16 See also page 5, “Hanging Upright”, for spacing and weight capacities. UPRIGHT SPACING 24” 30” 36” Open Slide® II 75 lbs./ft/ 50 lbs./ft. ----- Profile 100 lbs./ft. 75 lbs./ft. 50 lbs./ft. Melamine 100 lbs./ft. 75 lbs./ft. 50 lbs./ft. O-Boxes 250 lbs. 275 lbs. SCHULTE freedomRail Training Manual Page...
  • Page 17: Basic Installation

    If you had 5/32” pilot holes in stud locations (see #5 above) go back now and drill wood screws into these pilot holes. 10. Place Cover Stickers over each screw head. SCHULTE freedomRail Training Manual Page...
  • Page 18 - Push Rod Stop into Chrome Rod. - Twist Rod Stop clockwise until snug. 2. Install Chrome Rod onto Rod Clips. - Align Chrome Rod under shelf. - Put downward pressure on each Chrome Rod until it snaps into place SCHULTE freedomRail Training Manual Page...
  • Page 19 • It is not recommended to use Wall Mounted Uprights because of leveling and spacing issues. Installation • When aligning the O-Box bracket to the Hanging Upright, use the slots on the inside of the Uprights. • When installing a stack of O-Boxes, install the bottom O-Box first. SCHULTE freedomRail Training Manual Page...
  • Page 20: Technical Specification

    MISCELLANEOUS: 7913-3590-11 (-45,-50) • All measurements are ± 1/8" (2mm). Length: 90" (228.6cm) • Drawings are not to scale. Screw Holes: • See Bracket Specifications for load Weight Ea: 7.68 lbs (2.866 kg) capacities. Case: SCHULTE freedomRail Training Manual Page...
  • Page 21 3.0 lbs (1.36 kg) Case: • Drawings are not to scale. • See Bracket specifications for load 7913-3094-11 (-12,-14) capacities. Length: 94.25" (240 cm) Sets of Slots: Screw Holes: Weight Ea: 3.8 lbs (1.73 kg) Case: SCHULTE freedomRail Training Manual Page...
  • Page 22 24” - heavy-duty use Type of Shelf: Ventilated MISCELLANEOUS: Length: 12.0 (305mm) Load Capacity: 100 lbs45 kg • All measurements are ± 1/8" (2mm). Weight Ea: 1 lbs (.45 kg) • Drawings are not to scale. Case: SCHULTE freedomRail Training Manual Page...
  • Page 23 • General Spacing of Uprights and Brackets -- Melamine Shelving: 36” - standard closet use. 30” - pantries or garages 24” - extra heavy-duty use MISCELLANEOUS: • All measurements are ± 1/8" (2mm). • Drawings are not to scale. SCHULTE freedomRail Training Manual Page...
  • Page 24 • For heavier, more demanding loads, such as aquariums and store fixtures, use Heavy- Duty Brackets, and follow Wall Mounted Uprights spacing instructions for heavier loads (every 16”). MISCELLANEOUS: • All measurements are ± 1/8" (2mm). • Drawings are not to scale. SCHULTE freedomRail Training Manual Page...
  • Page 25 Hole 1: #6 x 1-1/8" (29mm)* Hole 2: #6 x 2" (50mm)* Hole 3: #6 x 3" (76mm)* * Assuming wood penetration of ½". MISCELLANEOUS: • All measurements are ± 1/8" (2mm). • Drawings are not to scale. SCHULTE freedomRail Training Manual Page...
  • Page 26 Insert Rod Stop into end of Chrome Rod. Weight Ea: 4 lbs(1.8 kg) Turn until snug. Case: INSTRUCTIONS FOR 7913-1524/36/48/96: Snap Chrome Rod into Rod Clip. ROD STOP 7913-1510-34 Diameter: 1-1/4"(3.2cm) Weight Ea: .10 lbs(.05 kg) Case: 12 pairs SCHULTE freedomRail Training Manual Page...
  • Page 27 UNIVERSAL ANCHORS GENERAL INFORMATION: 7913-9137-11 • Hardware packages for Heavy Duty • Used to attach Hanging Rail or freedomRail mounting systems options. Wall Mounted Uprights to walls. MISCELLANEOUS: • For wood, masonry and hollow wall applications. • All measurements are ± 1/8" (2mm).
  • Page 28 • Includes: • Hardware packages for Heavy Duty - Six #6 x 2" Phillips Flat Head Wood Screws. freedomRail mounting systems options. - Six #6 x 1-1/8" Phillips Flat MISCELLANEOUS: Head Wood Screws. • All measurements are ± 1/8" (2mm).
  • Page 29: Melamine/Laminate Color Matches

    Cabinet Maple= Casco H1400- DURAMINE # G403 • Harvest Cherry= Casco H1417- DURAMINE # G522 • Oxford White= Casco W600- DURAMINE # W811 • Fog Gray= Casco U212- DURAMINE # S211 • Graphite= Casco M610-DURAMINE # M610 SCHULTE freedomRail Training Manual Page...
  • Page 30: Warranty

    (2) years from the date of purchase. In case of any claim hereunder by a non-domestic use customer, such claim must be received by SCHULTE prior to a date ending on the second year after original purchase. In case of any claim hereunder, SCHULTE agrees, at its sole discretion, to provide replacement product (FOB at the SCHULTE plant in Bloomington, IN) or a refund of the original purchase price.