Tools And Templates - Schulte Classica Series Manual

Tools
• Circular saw with blade (fine, triple
chip, or laminate blade)
• Magnetic drill tip
• #2 Phillips Bit tip
• #3 Phillips Bit tip
• #2 Square Bit tip
• 3/16 Drill Bit (Hamper Template)
• 5/16 Drill Bit and Counter Sink
• B/32 Drill Bit (Drawer/door pull)
• 1/8 Drill Bit and counter sink (top
shelf and melamine screw)
• 15/64 Drill Bit (Shoe Fence
Template)
• #2 Phillips Screwdriver
• #3 Phillips Screwdriver
• Hammer/Rubber Mallet
• Pliers
• Cordless Drill(s)
• Wood Shims
SCHULTE Classica Installation Training
• Hack Saw, plumbers tubing cutter
or chop saw
• Metal File
• 80 Grit sanding block
• "Goo-Gone" type cleaner
• Shop Vac
• Shop towels
• T-Bevel
• Spray cleaner
• Measuring Tape
• 6 X ½" Wood Screws
• Stud Finder
• Razor Knife
• 24" Level
• 48" Level
• 72" Level
• 1 ¼" Drywall Screws
• Hand Roller
• Edge-Band Trimmer
Page 22