Schulte Classica Series Manual page 23

Templates
Drawer Front Template
• Aligns drawer hardware on drawer fronts.
• Fits with knobs and pulls in all sizes of
drawer fronts.
• Holes are drilled with a 5/32" drill bit.
• 30mm screws are used with the
Decorative Drawer Fronts and 38mm
long screws are used for the Plain Drawer
Fronts.
Hamper Hinge Locating Template
• Used toquickly locate the proper hole
location on the bottom fixed shelf for
hamper door hinges.
• Works with right and left hinges.
• Holes are drilled with a 3/16" drill bit.
SCHULTE Classica Installation Training Page 23