Island Cabinet B Assembly - Schulte Classica Series Manual

Island Cabinet B Assembly

1. Side Panels
• Lay both Side Panels (41" X 14")
on flat surface with holes facing up
• Hole Patterns are identical on each
panel therefore side panels are
interchangeable.
2. Connecting Bolts
• Insert connecting bolts into hole
locations as indicated on both
panels.
• Tighten bolts using #2 Phillips
screwdriver. If using drill with
Phillips bit, set on low to medium
torque.
3. Top Shelf
• Attach top shelf (14" X 32") to
one of the side panels.
• With side panel remaining flat,
align pre-drilled, cam-lock hole in
top panel with connecting bolts in
side panel.
• Lower top panel into place so that
the edge banding is all facing in the
same direction.
• Turn each cam-lock clockwise ¼
turn until snug.
4. Bottom Shelf
• Attach Bottom Panel (24" X 32")
to same side panel, following same
procedures as in step 5.
SCHULTE Classica Installation Training
14"
41"
Page 73